凉山州附近有没有服务

Product display
Current location: home page > Product display > Hydraulic system >Small energy saving hydraulic station 1.5kw
 Small energy saving hydraulic station
  •  Small energy saving hydraulic station 1.5kw
  • [product name]

    Small energy saving hydraulic station 1.5kw

    [classification] Hydraulic system
    [product model] SHSV-20E15-08B38
    [market price] Face to face
    [manufacturer] Ningbo Youzhi Machinery Technology Co., Ltd

product details

Product introduction

 1.5KW small energy saving hydraulic station

1.5KW small energy-saving hydraulic station is a new type of hydraulic station which uses frequency conversion controller to achieve the purpose of energy saving by monitoring the pressure sensor data and according to the pressure demand. As long as the 220V / 380V power line is connected, the action can be carried out. This type of hydraulic station is widely used in CNC machine tools, hydraulic presses and other places with hydraulic power demand.

Energy saving advantages

   1. Pressure maintaining + operation mode can save about 70% energy consumption.

Under the condition of voltage maintaining, the motor speed is reduced to reduce the power consumption cost and oil rise.

   2. One can drive two, two sets of equipment use one energy-saving hydraulic station.

Through the valve group control, a hydraulic station works for two machine tools at the same time, which does not affect the work of different beats.

   3. Light structure, oil and space saving.

The hydraulic station with the same efficiency only needs to use 30% of its oil storage, saving two-thirds of the oil and saving about 60% of the space.

   4. High speed response ability, improve production efficiency.

The reaction time from pressure maintaining to maximum displacement is about 0.1s. ABB controller from Europe and sensors from Germany are used. The sensing system with sensitivity is equipped with Taiwan plunger pump. The low-speed inertia is small, and the stop or operation switch can be realized within 0.1s.

   5. Constant temperature and stability, reduce the loss of machine tool.

Through the monitoring of pressure, it can supply the necessary flow when necessary according to the working load state.

   6. It is easy to operate and directly connects with CNC operating system.

The 380V / power line can be connected.

Product display

 Product display of 1.5KW small energy saving hydraulic station

  

technical parameter

project data
model SHSV-20E15-08B38
Motor power 1.5KW, in line with international ie energy efficiency level 3 energy saving standard
Power specifications Three phase four wire AC380V, including ground wire, 50-60Hz
Oil pump flow 08cc/rev
Output pressure 15-70Kgf/CM2
Tank capacity 20L
Average working current < 0.95a/phase
Average power consumption <0.25kw/h
Average oil temperature < room temperature + (5-10) degrees
structure The controller is located on the side of the fuel tank

Model description

 Model description of 1.5KW small energy saving hydraulic station

Energy saving detection and effect comparison

 1.5KW small energy saving hydraulic station
   

Company honors and cooperative customers

Contact information of Youzhi Technology

Copyright 2017-2018 © stod-project.com All Rights Reserved Regional substation Website map XML

Zhejiang ICP Bei 14023680-2