凉山州附近有没有服务

News and information
Current location: home page > News and information >Technical knowledge
  • 08

    2019-01

    Problems and solutions in the use of hydraulic station

    Problems and solutions in the use of hydraulic station: 1. Inspection and treatment of pressure loss phenomenon in hydraulic station sometimes. 1. The outgoing line of moving coil of electro-hydraulic pressure regulating device is not firmly welded, which suddenly breaks off, and some welding joints are not welded properly, which causes interruption to the roller crusher manufacturer

  • 03

    2019-01

    Notes on use of hydraulic station

    The hydraulic station is mainly composed of hydraulic pump, driving motor, oil tank, directional valve, throttle valve, overflow valve, etc., in addition to control valve. Cooling mode of hydraulic station: the cooling mode of hydraulic station has two main types, which are as follows

  • twenty-six

    2018-12

    Principle and maintenance of non standard hydraulic station

    The principle of non-standard hydraulic station: it is composed of two hydraulic cylinders of different sizes. Each of the two cylinders has a piston that can slide. If a certain value of pressure is added to the small piston, according to Pascal's law, the small piston will transmit this pressure to the large piston through the pressure of liquid

  • 04

    2018-12

    How to choose the rated pressure of pressure valve in hydraulic station?

    Selection of rated pressure of pressure valve in hydraulic station: the rated pressure of pressure valve in hydraulic station is the basic performance parameter of hydraulic valve, which indicates the bearing capacity of pressure valve, and refers to the nominal pressure of pressure valve under rated working condition. Hydraulic station pressure valve rated pressure selection, should be

  • fourteen

    2018-11

    Working principle and process of hydraulic station system

    The hydraulic station is an independent hydraulic device. It supplies oil according to the requirements of the driving device (main engine), and controls the direction, pressure and flow of the oil flow. It is suitable for various hydraulic machinery where the main engine and the hydraulic device can be separated. After purchase, the user only needs to connect the hydraulic station with the main engine's actuator (oil cylinder and oil motor)

  • twenty-four

    2018-10

    Notes on installation of hydraulic cylinder in hydraulic station

    Notes for installation of hydraulic cylinder in hydraulic station: 1. Gasifying antirust agent is sealed in the oil cylinder of open box hydraulic station, so the imported plug shall not be removed before the device. If the plug is removed, it is necessary to install it on the body immediately and fill the oil cylinder with oil. ...

  • twenty-three

    2018-10

    Causes and treatment of common faults in hydraulic station

    Causes and treatment of common faults in hydraulic station: 1. The oil pressure value can not guarantee the fault reason: the reason is that there is air suction in the system, there are many foam in the oil tank, or there is large leakage in the overflow valve and electromagnetic directional valve. Treatment: check the hydraulic pressure

  • eighteen

    2018-10

    Characteristics of high pressure angle cylinder in hydraulic station

    Hydraulic station high-pressure angle cylinder features: 1. The hydraulic station high-pressure angle cylinder is suitable for the workpiece taking and placing, and the space needs to be kept static, which is convenient for the workpiece taking and placing and high-pressure clamping; 2. The clamping action of the hydraulic cylinder is downward pressure type, including rotation stroke (do not clamp the workpiece) and vertical downward pressure

  • seventeen

    2018-10

    Composition of hydraulic station and matters needing attention in use

    The composition of the hydraulic station: 1. The pump device is equipped with motor and oil pump, which is the power source of the hydraulic station and converts mechanical energy into the power energy of hydraulic oil; 2. The manifold block is composed of hydraulic valve and channel body. It carries out direction, pressure and flow to hydraulic oil

  • twenty-eight

    2018-09

    The manufacturer of hydraulic station introduces the matters needing attention in the use of hydraulic station

    The hydraulic station supplies oil according to the requirements of the main engine, and controls the direction, pressure and flow of the oil flow. The small hydraulic station is suitable for all kinds of hydraulic machinery which can be separated from the main engine and the hydraulic device. Generally, it is an electromechanical device that provides lubrication and power for the mechanical operation of large and medium-sized industrial production. But the hydraulic station in the application process

Copyright 2017-2018 © stod-project.com All Rights Reserved Regional substation Website map XML

Zhejiang ICP Bei 14023680-2