凉山州附近有没有服务

News and information
Current location: home page > News and information >Frequently asked questions
  • eighteen

    2019-04

    How to solve the problem of high hydraulic oil temperature in hydraulic station?

    Under normal conditions, the oil temperature of the hydraulic oil in the hydraulic station should be between 30-80 degrees. If the temperature is too low, the viscosity of the oil is high, the fluidity is poor, and the resistance is large, resulting in the low working efficiency of the hydraulic system. If the oil temperature is lower than 20 degrees, sharp turning will easily damage the hydraulic system components such as hydraulic motor, valve and pipeline. ...

  • twenty-nine

    2019-03

    How to improve the efficiency of hydraulic station?

    How to improve the efficiency of hydraulic station? Hydraulic station in the process of work can not avoid the loss of power, how to improve the power of the system? First of all, to choose the pressure limiting variable pump, when the system pressure decreases, the flow is relatively large, can meet the rapid travel of the actuator, when the system pressure increases

  • thirteen

    2019-03

    How to ensure the long-term stable work of hydraulic station?

    Methods to ensure the long-term stable operation of the hydraulic station: 1. To prevent the oil temperature of the hydraulic station from being too high, the oil temperature of the hydraulic station system is generally 15-50 ℃, which will produce a series of adverse results. Second, prevent air from mixing into the system and timely mix the body

  • 06

    2019-03

    What are the factors to consider when choosing a hydraulic station?

    The factors considered in the selection of hydraulic station: 1. Pressure, flow rate and efficiency. Pressure, flow rate and efficiency are the basic parameters for selecting hydraulic pump. Generally speaking, in low pressure condition, any type of pump can be used. High pressure working condition should choose plunger pump, gear pump is used more in medium pressure condition

  • twenty-two

    2019-02

    What requirements should the use of oil tank in hydraulic station meet?

    The oil tank of hydraulic station shall meet the following requirements: the first type of oil tank is steel plate oil tank, which is basically made of steel plate with thickness of more than 10 mm. If you want to improve the stability of oil tank in hydraulic station, it is OK to add a layer of steel bar. The material of the first kind of fuel tank

  • fifteen

    2019-02

    What are the use requirements of hydraulic station?

    The hydraulic station is actually a kind of hydraulic device, and its main purpose is to complete various specified actions. The use requirements of hydraulic station: first of all, when the hydraulic station is installed and overhauled, dirt and iron chips should not fall into the oil tank, but also prevent the occurrence of air leakage in the oil pump suction pipeline

  • twenty-one

    2019-01

    Is there a difference between the oil tanks of different hydraulic stations?

    There are oil tanks in the hydraulic station, and the oil tank is one of the indispensable important components of the hydraulic station. The hydraulic oil tanks used in the hydraulic stations of different systems are different. What is the difference between the oil tanks of different hydraulic stations? Youzhi hydraulic station for you to introduce: first of all, a case

  • sixteen

    2019-01

    How to choose hydraulic oil station?

    Hydraulic oil is a very important and key material in the hydraulic station, so it must be carefully selected. The hydraulic oil has many functions in the hydraulic station, such as energy transmission, lubrication, sealing, cooling, rust prevention and so on. Hydraulic oil will flow through all pipes, small holes, gaps and openings in the hydraulic station

  • twenty-nine

    2018-12

    What factors should be considered in commissioning hydraulic station?

    Factors to be considered in debugging hydraulic station: hydraulic station is actually a kind of hydraulic device. During debugging, three factors are mainly considered: oil circuit, pump and circuit pressure of small hydraulic station. 1. First of all, the oil circuit of small hydraulic station: general hydraulic oil circuit

  • twenty-one

    2018-12

    How to solve oil leakage in hydraulic system of hydraulic station?

    In the hydraulic system of the hydraulic station, the leakage of hydraulic oil is a common fault. The common solutions are as follows: 1. The leakage caused by the impact of external force can be taken to protect the hydraulic system

Copyright 2017-2018 © stod-project.com All Rights Reserved Regional substation Website map XML

Zhejiang ICP Bei 14023680-2