凉山州附近有没有服务

News and information

Principle and maintenance of non standard hydraulic station

Author: Youzhi technology time: December 26, 2018 reading: 58 times

 Principle and maintenance of non standard hydraulic station

Nonstandard Hydraulic station Its principle is as follows

It is composed of two hydraulic cylinders of different sizes. Each of the two cylinders has a piston that can slide. If a certain value of pressure is added to the small piston, according to Pascal's law, the small piston will transmit this pressure to the large piston through the pressure of the liquid, and then the large piston will go up.

System structure of nonstandard hydraulic station

The hydraulic system is composed of signal control and hydraulic power. The signal control part is used to drive the control valve in the hydraulic power part.

Maintenance of non-standard hydraulic station:

1. Keep the oil clean

Dirt in the oil will damage the parts of the system;

2. Stick to oil quantity

If there is less oil, air will enter into the system and the system will not operate normally;

3. Pay attention to oil leakage

Oil leakage indicates that if the seal is broken, if it is not replaced in time, it will not only consume oil, but also reduce the output and do not act when it is severe;

4. Be familiar with the sound of system operation

Normal and defective sound is different, hear abnormal sound to know that there is a problem, timely eliminate, to avoid small hair lesions eat big damage, cause large loss;

5. Pay attention to check whether the tight parts are loose

We should adhere to the current situation.


Copyright 2017-2018 © stod-project.com All Rights Reserved Regional substation Website map XML

Zhejiang ICP Bei 14023680-2